초록
<P><B>Abstract</B></P> <P>Anaerobic digestion for biogas production is one of the most used technology for bioenergy. However, the adoption of nanoparticles still needs further studies. Therefore, this study was designed to examine the effect of metal oxide nanoparticles (MONPs) at four different concentrations in two different combinations, 20 (R1) and 100 (R2) mg/L for Fe<SUB>2</SUB>O<SUB>3</SUB>, 100 (R3) and 500 (R4) mg/L for TiO<SUB>2</SUB>, and a mixture of Fe<SUB>2</SUB>O<SUB>3</SUB> and TiO<SUB>2</SUB> at rates of 20, 500 (R5) and 100, and 500 (R6), on hydrogen sulfide (H<SUB>2</SUB>S) mitigation, biogas, and methane (CH<SUB>4</SUB>) yield during the anaerobic digestion of cattle manure (CM) using an anaerobic batch system. The results showed that H<SUB>2</SUB>S production was 2.13, 2.38, 2.37, 2.51, 2.64, and 2.17 times lower than that of the control (R0), respectively, when the CM was treated by the aforementioned MONPs. Additionally, biogas and CH<SUB>4</SUB> production were 1.09 and 1.105, 1.15 and 1.191, 1.07 and 1.097, 1.17 and 1.213, 1.10 and 1.133, and 1.13 and 1.15 times higher than those of R0 when R1, R2, R3, R4, R5, and R6 were supplemented with MONPs, respectively. The highest specific production of biogas and CH<SUB>4</SUB> was 336.25 and 192.31 mL/gVS, respectively, which was achieved by R4 supplemented with 500 mg/L TiO<SUB>2</SUB> NPs, while the corresponding values in the case of R0 were 286.38 and 158.55 mL/gVS.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Fe<SUB>2</SUB>O<SUB>3</SUB> and TiO<SUB>2</SUB> NPs were used to control H<SUB>2</SUB>S and improve CH<SUB>4</SUB> production. </LI> <LI> The application of MONPs to CM has resulted in 53.02–62.07% reductions of H<SUB>2</SUB>S. </LI> <LI> The supplementation of 100 mg/L of Fe<SUB>2</SUB>O<SUB>3</SUB> NPs promoted the CH<SUB>4</SUB> yield to 119%. </LI> <LI> Using 500 mg/L of nano-TiO<SUB>2</SUB> in batch experiment improved the CH<SUB>4</SUB> yield to 121%. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>