초록
<P><B>Abstract</B></P> <P>Thermal and acid hydrolysates of oil palm empty fruit bunch and other lignocellulosic substrates contain glucose, xylose, and acetic acid as the main components. In using such hydrolysates for photofermentive production of biohydrogen, the gas yield is highly dependent on the composition of the mixed carbon substrate. Batch photofermentation experiments were used to investigate the effect of the composition of the mixed carbon (glucose G, xylose X, and acetic acid A) on growth and hydrogen production by the bacterium <I>Rhodobacter sphaeroides</I> S10. Anaerobic fermentations were carried out at 35°C under an incident light level of 14.6W/m<SUP>2</SUP>. The mixed carbon composition strongly influenced hydrogen and biomass production. Depending on the composition of the mixed substrate: the cumulative hydrogen volume ranged from 0.99 to 2.33L H<SUB>2</SUB>/L medium; the conversion efficiency ranged from 21% to 45%; and the biomass yield on substrate ranged from 0.28 to 0.47g DCW/g (G+X+A). Based on the conversion efficiency, the optimal substrate for hydrogen production was a mixture of 5mM glucose, 18mM xylose and 7mM acetic acid. This combination gave a cumulative hydrogen volume of 2.33L H<SUB>2</SUB>/L medium. The hydrogen yield was 3.56mol H<SUB>2</SUB>/mol mixed substrate and the substrate specific hydrogen production rate was 7.26mL H<SUB>2</SUB>/g mixed substrate h. The conversion efficiency and the lag period of hydrogen production were 45% and 13h, respectively.</P> <P><B>Highlights</B></P> <P> <UL> <LI> H<SUB>2</SUB> is produced via photofermentation of mixed glucose, xylose and acetic acid. </LI> <LI> Relative amounts of the substrate components affect production kinetics. </LI> <LI> Optimal ratio of the substrate components is identified for H<SUB>2</SUB> production. </LI> <LI> Most lignocellulosic hydrolysates are made up of the above mixed substrates. </LI> </UL> </P>